operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Potato chips cleaning Equipment

Industrial cleaning equipment is used to wash or disinfect machinery and the production/warehouse area. It may also be used to sterilize the product, equipment, tools, floor or work surfaces and to purify or clean the product by removing impurities. Choosing a suitable cleaning system depends on the type of product or equipment to be cleaned, the sensitivity of the product to heat, pressure, and chemicals, and the level of sterility desired.

Cleaning

Manufacturing potato chips is a farm-to-fork process from raw material to the final product. From washing and peeling to processing and frying and more in between. Freshly harvested potatoes are first washed, peeled, and sliced into thin potato slices. After washing them again to remove the starch, potatoes are then blanched, fried, seasoned, packed, and served, ready for your consumer’s enjoyment.

Potato chips

With an increase in demand for production across food service and manufacturing companies, the necessity for a washing system that can process high volumes of food containers, storage crates and pans from various sizes and shapes becomes evident. Such a system will not only increase the volume of processed items per hour but will also minimize the need for manual intervention and increase washing effectiveness.


<h2>High capacity conveyor tunnel washing system for containers, crates, and pans</h2>
The LCT A series by Velox Barchitta are a number of tunnel washing systems with continuous conveying in three dimensions of inner width 600 mm, 820 mm, 1100 mm with height of up to 500 mm.

The models that are part of the LCT A series can comfortably wash anywhere between 600 to 5000 crates per hour. Furthermore, if needed, they can be equipped with either standard or motorized blowers and a drying system that is 100% effective.

As per washing capabilities, the LCT a 60 210 GR unit is engineered to wash with an increased level of water abrasion. Therefore, when the crates are washed, the cleaning performance will be the same as if they were washed with a brush. This will reduce the costs for any detergent, power, and time.

All units are also integrated with a micro economizer, which makes the system most cost-efficient, a safety clutch on the belt with vertical pumps, which allow the system to completely drain away all of the wash water.

Moreover, the units are completely insulated and controlled by PLC with touch screen through which the operative can manage software with alarms, control parameters, and reports.

Tunnel washer for food containers

Washing potatoes or other vegetables can be a time consuming task for large restaurants or other food industries like canteens. Automating the cleaning process of these vegetables before cooking saves not only on time, but also manpower and water.


<h2>Automatic vegetable washing</h2>
The Dreener line by Firex is an industrial vegetable washer. The vegetables are placed in the machine and water is filled automatically controlled by a level sensor and solenoid valve. The timer sets the desired washing time. Removable walls allow to divide the washing tank into several compartments to wash different types and quantities of vegetables at the same time. The machine has a perforated false bottom that allows dirt to go through, but holds the vegetables inside. There are three high pressure nozzles that clean the dirt that might be left in the machine after the washing cycle.

It can wash 100 kilo of dirty potatoes in 15 minutes. The washing machine can be accessorised with manually tilting baskets of two dimensions for the extraction of the product. It is available in volumes of 150, 225 and 300 litres.

Industrial potato washer

The effective fruit and vegetables’ initial preparation for production can be a tremendous task without the appropriate apparatus. And so, if you are searching for a solution that is capable of effectively removing the most stubborn of dirt particles from products in a timely manner, you can greatly benefit from this system.


<h2>High capacity fruits and vegetable washing machine</h2>
Washing machines are an essential part of the product preparation process, and so, the units from PIGO offer a great solution for businesses who are after an automated unit with high vegetable washing capacity that is easy and convenient to use.

The high-pressure blower which all PIGO washing machines are equipped with is attached to the nozzles together with a complex system of valves and filters that helps in the removal and clean-up of even the most stubborn dirt particles.

The construction of the unit is designed in a way that preserves the shape and quality during the washing process without damaging the original properties of delicate products like berries. Moreover, the structure design allows for easy maintenance and cleaning of the unit.

Industrial washing machine for fruits and vegetables

In potato chip production, maintaining clean potato slices post-cutting is crucial. A system is needed to remove surface starch and fines while optimizing water use and preventing product damage.
<h2>Removes surface starch and fines efficiently</h2>
The Gentle Wash Potato Slice Washer by Heat and Control is a specialized solution for cleaning potato slices. It utilizes a 3-stage wash process with two reused water rinses and one fresh water rinse, followed by an AirSweep vacuum/blow-off system to remove surface water and fines. This design reduces fryer fuel usage and cleaning costs. The washer features individual, easy-to-install modules that can be configured to fit existing production lines and require minimal floor space. The Spiral Action Gentle Washer ensures thorough cleaning without mechanical agitation, thus preventing product damage. Ideal for potato chip production, this system spreads slices evenly across a dewatering conveyor to facilitate better dewatering, reduced fuel usage, and prevent slice clustering or uneven cooking.

Potato slice washer for surface starch and fines removal

In food processing industries, managing oil mist emissions is critical to maintaining a clean work environment and efficient fryer operation. The challenge lies in reducing these emissions without incurring high maintenance costs.
<h2>Eliminate oil mist emissions efficiently</h2>
The Oil Mist Eliminator from Heat and Control is designed to reduce oil mist pollution by eliminating emissions at the fryer stack. This system collects oil on reusable stainless steel mesh pads that are easy to clean with a built-in clean-in-place spray system. The collected oil can either be returned to the fryer or disposed of. This solution eliminates the need for high-horsepower fans, afterburners, or water, making its maintenance negligible. It can be seamlessly installed on both new and existing fryers, offering retrofit kits that include necessary components such as clean-in-place sprays, stainless steel housing with hinged doors for easy pad replacement, and exhaust fans. Ideal applications for this system include potato chips, prepared foods, French fries, snack foods, kettle chips, corn and tortilla chips, and taco and tostada shells.

Industrial oil mist eliminator

Fried peanuts are a very popular snack around the world. If you are looking to start a nut processing plant to capitalise on this market, maintenance of product quality and taste is key. When frying nuts, optimal heat distribution and oil quality are the most crucial factors. A state-of-the-art fryer and process are needed to deliver the exact heat load needed to fry your product efficiently while maintaining its taste.


<h2>Save time, frying oil and labour costs</h2>
Kuipers’ production line for nuts and seeds is configured for optimal frying-oil handling and heat treatment resulting in the lowest possible development of Free Fatty Acids as well as lowest frying oil turnover time in the industry.  It is a frying oil heating system with an innovative design that uses circulating thermal oil as a heat carrier. This allows the reduction of the amount of frying oil required to its lowest .

The <a href="https://making.com/peanuts/">peanut processing machine</a> and frying line keeps in mind the importance of oil quality as it not only acts as the heat transfer medium but is also absorbed by your product. It is thus equipped with a unique filtration system where constant removal of the dirt allows the quality of the frying oil to remain adequate much longer than other conventional systems. It is an automatic and continuously operating filtration system.

All Kuipers lines allow the option to heat the frying oil in the fryer with either thermal oil or electrical elements. With a few additions, the plant can also be upgraded to produce coated and <a href="https://making.com/battered-nuts/">battered nuts</a>. It can be applied for the frying of peanuts, <a href="https://making.com/cashews/">cashew nuts</a>, almonds, macadamias and other nuts or seeds.

Peanut frying line

The key to making a flavorful and crispy bag of potato chips is the frying temperature within the frying machine. Uniform cooking conditions ensure a consistent taste, bite, and color when it comes to potato chips processing. But maintaining steady temperatures across the entire processing line can be challenging, particularly when frying potato chips at high capacities.


<h2>Distribute the frying temperature evenly with multiple oil injection points</h2>
The semi automatic Potato chips production line frying plant from Kuipers uses multiple fully automatic oil injection points to deliver even temperature distribution within the potato chips machine. Manufacturers can manage heat across the width and length of the system to maintain optimum frying conditions throughout the whole process. Distinct oil injection zones facilitate temperature control which needs to be optimal for quality, tasty products.

A full turnkey system for producing potato chips is included in this production line. The machine includes washing, peeling machine, cutting potato slices, blanching, packing machine and most importantly, fries potato chips. For a small scale or full scale potato chips plant, this stainless steel production line does it all so you can successfully make potato chips from start to finish including packaging.

The chip fryer is designed for processing all styles of potato-based fried snacks, including chips, sticks, and hard-bite-style crisps. As well as sweet potato chips, banana chips and french fry style crisps. Capacities are offered from 250 kilograms per hour output to 1000 kilograms per hour output depending on oil volume. The best oil will produce the best final product.

Potato chips production line

<span style="font-weight: 400;">From cassava to sweet potatoes, various types of vegetables are processed to make one mixed bag of vegetable chips. Mainly consisting root vegetables like taro and parsnip, vegetable chips are often introduced as a healthy alternative to potato chips. To make these chips, you first need to slice the vegetables and cook them depending on your product; you can simply bake them or fry them, deep fry them, or dry them. After this process, flavorings are added to the chips. </span>

Vegetable chips

Pellet snacks, or snack pellets, are intermediate products which you can further process and develop into snack products for consumption. Pellet snacks production involves mixing, extrusion, frying, and packing. Since these are intermediate products, final product customization on the production line will depend on your customer’s desired product and flavor profile.

Pellet snacks

Peanuts, also known as groundnuts are one of the most popular edible seeds in the world. You can eat them as-is or process them further into on-the-shelf products like peanut butter, oil, snacks, and soups. Depending on what you want to make, some peanut manufacturing processes include roasting, frying, boiling, grinding, pressing, and coating the peanuts.

Peanuts

Kuipers Food Processing Machinery specializes in the technology for the frying and processing of snacks, savouries, nuts, seeds and potato products.

Fast plant startups require well-defined roadmaps for scope, time, cost, and quality, to facilitate decision-making when purchasing and installing industrial technology. We spoke to Valeria Lucinschi, General Operations at Kuipers Food Processing Machinery, to learn how they ensure an efficient buying and installation cycle and align their fryers with producers’ goals.


<h2>The buying cycle from product testing to FAT</h2>
Valeria explains that when you contact Kuipers to choose a frying technology for your snack, the food engineering team will observe the product's behavior, document it, collect data, and perform computer simulations considering oil efficiency and turnover times. Product testing will help to determine the ideal fryer, size, oil amount, processing time, and other product-specific parameters. “Many new products need further testing to ensure the target outcome can be achieved,” Valeria states.

The buying cycle described by Valeria begins once the parameters are agreed upon. “The engineering department creates the drawings and sends a work order to manufacturing. When the fryer is built and assembled, Kuipers’ service team takes over with electrical pre-wiring and automation. Then the plant is fully pre-tested to ensure that all the main parts are functional. You are invited to attend the factory acceptance test (FAT) and may request alterations at this stage if needed,” Valeria indicates.

“After your agreement, the fryer is packed in Lego-like blocks and shipped. In the best-case scenario, a small standard fryer can be ready within 36 weeks. However, delivery times may be longer depending on the waiting list,” Valeria concludes.
<h2>Site preparation and modular design: the key to quick startup</h2>
Site preparation is crucial for a quick startup. Ensure your facility has the required electrical connection, automation cables, and piping in place beforehand. Kuipers’s modular design makes installation nearly plug-and-play. “The plant can be assembled like Lego blocks and plugged into the utilities,” Valeria says. Kuipers will run an acceptance test on your site and train your operators before finalizing the handover.

According to Valeria, “Kuipers' modular design allows small standard frying plants to be operational within one week of delivery, compared to most equipment suppliers, which take about a month to install and start up a plant. This can save you a significant amount of time and money, considering that an average engineer day costs more than 1000 euros.”

When choosing industrial technology, consider the operation and maintenance requirements as well. Valeria highlights that “With Kuipers' frying systems you can operate for many days without having to change your oil’’. These efficient systems allow you to produce continuously while not compromising your product quality.

Modular plant designs are a way to go if you want to start and run your production, saving time, and hence, money.

Modular design for a fast fryer plant startup

Food

Our food chain starts in the soil, growing crops and livestock. But between the fields and the stores, there is a line of industrial food processing equipment. Processes may be as minimalistic as cleaning fruit and as complex as homogenizing milk alternatives made from pressed legumes. In each case, processing technology is an important link in the food production chain.

A fresh salad with a walnut oil dressing or a peanut butter sandwich? A bag of roasted cashews or a pack of almond cookies? The common thread among these tasty treats is nut processing equipment. Not all nut ingredients are indeed nuts, botanically speaking. But the machinery that transforms shelled fruits, legumes, and drupes into fried snacks or a paste is similar. As for the food products, there is a nut recipe for every mood and occasion.

Nuts

A snack is a small portion of food ready to eat and simple and fast to prepare. People usually consume snacks during the day between traditional meals such as breakfast, lunch, or dinner. Snack foods include simple products such as nuts, dried fruits, peanuts as well as packaged and processed foods. Puffed corn products made by extrusion or flavored potato chips are examples of processed foods.

Snacks

Water is one of our most precious assets, and we are not making good use of it. It has been estimated that by 2030, half the population will face water scarcity problems due to climate change, water pollution and a growing population. The manufacturing industry consumes between 20-40% of all available freshwater, so the question arises: what are manufacturers doing to reduce water consumption in the industry?

We broached the subject with Valeria Lucinschi, from <a href="https://kuipers.nu/">Kuipers Food Processing Machinery</a> to learn how this works in potato chip production.


<h2>Potato chip producers use on average eight cubic meters of water per hour. Wait, what?</h2>
Yes, you heard it right. On an industrial scale, producers consume 8 m<sup>3</sup> of water per hour when making potato chips. Water is used in almost all preparation steps and is essential when preparing potato slices before frying. And not just for cleaning purposes as you may be thinking. After being washed for the first time and peeled, the potatoes are sliced and rewashed to remove some of the starch. If this step is not done well, it can greatly affect the quality of the end product as well as the frying process. Starch can block the evaporation of moisture from the potato when frying by leading to a browning reaction. If this happens, forget your crispy and golden-colored chips.

It is recommended to have a good slice washing system to wash the potatoes very carefully, mainly when the blanching is not applied. Although producers may skip this step, especially when potatoes are fresh, it is generally advised to blanch to ensure a smoother deep frying process. If blanching is applied, slices must pass a final washing and drying to remove any adherent particles and water before frying.
<h2>Reduce water consumption in your potato chip production line by 60%</h2>
Back to our question now. What are producers doing to reduce these eight cubic meters of water?

Valeria explained that Kuipers has reduced water consumption in the potato chip production line by recycling water from one stage to another. This can be done thanks to a water treatment system that only uses fresh water at one stage of production - to be clear when potatoes are on the spreading belt that blows water to wash them just before frying. From here, the system recycles the water that goes back to the previous stages. The water is filtered through a cyclone system that cleans it and removes the starch so it can be reused again. The Kuipers water system technology uses up to 60% less water than conventional systems, meaning they use 4 m<sup>3 </sup>per hour on average.

How to reduce your water footprint when making potato chips

If you are starting your own production for potato chips or expanding your brand to include fried potato snacks, you need a complete and cost-efficient production line. A solution that ensures minimal loss of raw material and efficient use of water and energy while maintaining excellence in taste, colour and texture of your fried potato snacks.


<h2>A complete and sustainable solution for frying potato products</h2>
<a href="https://making.com/equipment/potato-chips-production-line/">Kuipers’ complete processing and frying lines for various potato products</a> provide a turnkey solution of turning raw potato input into delicious deep-fried snacks until packaging. It offers a customized approach to process potato  products which consequently ensures efficiency throughout the line.

The frying line for potato chips uses gentle heat transfer to heat up the frying oil and ensure that your product is evenly fried. The production plant is a continuous and fully automatic operation. It starts with receiving the raw potatoes and includes the necessary potato washing and de-stoning equipment to clean and prevent damage to the peeling and slicing or dicing units. In the peeling stage, it applies batch type, abrasive peeling. It is also equipped with a blancher to reduce the sugar content from the potato slices and prevent quick dark colouring The plant also includes a smart water treatment system which allows the lowest possible water usage in the industry, reducing it by three hundred per cent.

Kuipers’ systems provide you with an option for frying oil heating via a thermal oil heater or electrical elements. Apart from potato chips, Kuipers also designs and manufactures small French fries factories for either frozen or chilled end products. The chips line can also be used to produce potato sticks.

Frying line for potato chips (redirected)

Do you have a guilty pleasure? Do you pause while walking down the supermarket's chips and fried snacks aisle? If the answer to those questions is yes, do you ever wonder about the journey of a raw potato from a farm up to the crispy, crunchy, and salty goodness that goes into your mouth? It involves many steps, from the raw potato input to peeling, slicing, and <a href="https://making.com/equipment/potato-blanching-machine">blanching the potato</a> until it is fried and coated with your favorite <a href="https://making.com/products/spices">flavors and spices</a>. With growing competition in the fried snack industry, these steps must be carried out carefully and consistently to produce the highest quality chips.


<h2>From farm to the fryer</h2>
The availability of raw inputs combined with a high local and global demand provides <a href="https://making.com/products/food">food processing</a> companies and local farmers with many growth opportunities. A regular <a href="https://making.com/potato-chips/">potato chip plant</a> makes thousands of chips every hour. The potatoes are washed and de-stoned to ensure they are clean and prevent damage to the peeling, slicing, or dicing units. In the peeling stage, batch type, abrasive peeling takes place. The potatoes then move along a belt to a slicing machine that slices them quickly using a razor-sharp blade. Ripple potato chips are cut by a serrated knife. It is then transported into a blancher to reduce the sugar content from the potato slices to prevent quick dark coloring and maintain product quality. These potato slices are then put into a vat of boiling vegetable oil with special <a href="https://making.com/deep-frying-equipment">deep fryer equipment</a>. As the potato chips cook, the water inside them turns to steam. After this, they are collected, drained, salted, and then ready to be packaged.
<h2>Producing the perfect bite</h2>
The fried snack market around the world is constantly growing. The main factors facilitating this growth include lifestyle changes, increased urbanization levels, and simply because the population has access to many more snacks than in previous years. This makes optimal production and quality control of utmost importance. The transportation of your product through the fryer must be perfectly done. Every piece must have the same frying time and no possibility of staying behind and burning. The <a href="https://making.com/technologies/frying">industrial fryers</a> for making potato chips are a continuous and fully automated production plant that ensures gentle heat transfer to heat the frying oil so that your chips/crisps are evenly fried. It also prevents the degradation of the oil quality, allowing you the lowest possible oil turnover needed!

[embed]https://www.youtube.com/watch?v=1wPYqa2OqMg[/embed]

How your fried snacks reach the racks?

Find production technology for Potato chips cleaning, and connect directly with leading machine manufacturers worldwide

Potato chips cleaning

Potato chips cleaning - Making.com

https://making-tst.imgix.net/2021/06/s4pc4sekwkg.jpg

Home

The marketplace for finding innovative production technology

Making.com

https://making-tst.imgix.net/2022/12/makingCopy.png

Potato chips cleaning Equipment

Which potato chips cleaning technology do you need?

Tunnel washer for food containers

Industrial potato washer

Industrial washing machine for fruits and vegetables

Potato slice washer for surface starch and fines removal

Industrial oil mist eliminator

There is currently no equipment listed with your specified properties, but we are sure we can help you. Try us!Contact us

Let's talk about your project!