operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Tablet Formulation Equipment

Chewable tablets are suitable for patients who have difficulty swallowing. Chewable tablet formulation masks the natural flavors of pharma drugs and alters their aftertaste. But besides the taste, chewable tablets favor the bioavailability of pharmaceutical ingredients.

Chewable tablets

The fizz of effervescent tablets is commonly associated with a vitamin C boost. But the soluble pill is an excellent drug delivery method for pediatric and geriatric patients. Sometimes referred to as carbon tablets, manufacturing effervescent tablets binds biocarbonate and citric acid that produce the smooth hiss as they dissolve in liquid.

Effervescent tablets

When taking a tablet, it is usually the job of our stomach to break down the medication to make it ready to be absorbed into the bloodstream. However, some drugs are not meant to be dissolved in the stomach because the acidic pH of the stomach can disintegrate the drug, making it no longer effective. Using tablet coating equipment that applies a polymer barrier to the tablet makes it possible to protect it from stomach acidity.

Enteric Coated Tablets

Microtablets range between 1 and 4 millimeters, making the dosage form an excellent delivery system in polypharmacy. The size of the products makes them easier pills to swallow, but microtablets production brings a unique set of complexities.

Microtablets

Multilayer tablets are a popular fixed-dose combination (FDC) offering a range of release profiles for effective drug delivery. Multilayer tablet technology solves challenges to API consistency, allowing manufacturers to develop formulations from incompatible ingredients while optimizing the release profile for immediate release and controlled release.

Multi-layer tablets

Used in the pharmaceutical industry to produce tablets and capsules, among others, pharmaceutical granules are made to enhance the uniformity and flow of powder, increase the density of the blend and reduce dust and, therefore, toxic exposure. The choice of the granulation process, whether it is wet, dry, or direct compression, as well as the selection of appropriate pharmaceutical granulation equipment, depends on the specific drug being formulated.

Pharmaceutical granules

It is strange how two tablets can belong to the same but at the same time to a different category depending on how the tablet itself is classified. For example, chewable tablets and effervescent tablets have two different routes of administration but both belong to the category of uncoated tablets. Uncoated tablets are prepared by compression of granules in which no coating is added after compression. They may be single-layer or multi-layer tablets.

Uncoated tablets

There are slight differences between human and animal pharmaceuticals, but that dissimilarity is enough to create new production challenges. Veterinary tablets formulation reflects the diversity of enzymes that different species use to break down substances. Although the methods involved are comparable to human drug manufacturing, equipment and processes need to adapt to a wider dosage variability in veterinary tablets.

Veterinary tablets

Lab-scale machine, perfect for smaller batch sizes

Easy to operate with digital control panel

High-shear operation for superior agglomeration

Pharmaceutical

Formulation Technologies

Formulation technologies are an integral process in many industries such as pharma and food. Chemical mixtures require strict handling to combine the separate ingredients into the homogenized recipe that makes your final product. Formulation technology stores, mixes and subjects the elements to a range processing parameters according to your specifications to develop the base material. The resulting formulas are then weighed, formed, packaged, or sent for further formulation.

Formulation

Connect directly with world leading manufacturers of formulation technologies and find technology to build or improve your production line.

Formulation - Making.com

Formulation Technologies and Equipment - Making.com

The most important part of a capsule is its contents. But if the shell is not carefully made, the dosage ingredients inside lose effectiveness. From molding to sizing, capsule manufacturing equipment forms perfectly-matching husks ready for filling. The simplicity of encapsulation revolutionized pharmaceuticals since it was introduced in the 19th century. However, capsules are changing to increase delivery efficiency and reduce the dependency on gelatin.

Capsules

Pharmaceutical developments walk side by side with health advances to provide new medicines, treatments, and therapies that have increased life quality and extended life expectancy by years. Pharmaceutical manufacturing equipment helps deliver products to a great deal of the population, but there’s a significant share that doesn’t benefit from them yet. Over 2 billion people cannot get the medicines they need, according to the United Nations Industrial Development Organization, and local production might be a way to provide for these people.

Pharmaceuticals

Among all dosage forms in use today, tablets constitute the most common one. They are pharmaceutical solid dosage forms containing active ingredients and excipients such as diluents, binders, glidants, and lubricants. Using tablet making equipment, these solid dosage forms are made by compression of granules or powder blends and then shaped by molding.

Tablets

Process

R&amp;D

Batch

Granulation

Industrial mixing equipment is used to combine two or more solid, liquid or gaseous segregated ingredients into a homogenous single product. The choice of mixing technology depends largely on the physical state of the ingredients and the desired final product. But the sensitivity of the ingredients, the process temperature, and pressure requirements are also critical factors. All these parameters result in a wide range of industrial mixers.

Mixing

solid

For pilot and lab-scale pharmaceutical formulations, a high-shear granulation mixer is the perfect choice for cohesive materials. Traditional low shear

Entry-level high-shear mixer for drug formulation - Making.com

https://making-tst.imgix.net/2017/09/Untitled-1.jpg

The marketplace for finding innovative production technology

Making.com

API making equipment must observe rigorous quality control standards across the entire manufacturing process. The pharmacodynamic properties of active pharmaceutical ingredients API make them highly sensitive to their environment, making API manufacturing and production a tightly regulated field.

Active pharmaceutical ingredients (API)

Highly flexible, with easily interchanged milling heads, providing better value

  Portable and height adjustable for use in different locations

  Highly uniform powder output

Easy to clean, simple to maintain

Research and development work often requires the production of small and ultra-small batches. Laboratory mills allow limited production of experimental batches without the need for interrupting work on production machines. Typical applications of laboratory mills include new product development, process improvement, and quality control work. The choice of a suitable laboratory mill depends on your milling technique requirement, the batch size range, and the nature of the product that needs to be processed.

Laboratory mills

The building blocks of matter have driven the imagination of philosophers, scientists, and artists for millennia. But, for manufacturers, these elements have a more concrete existence as powders. Powder processing technology conditions these primary materials to create a vast range of products, from chemicals and foods to pharmaceuticals and ceramics.

Powder

Milling machines are used to reduce the size of material by cutting, crushing, or grinding it. The choice of industrial milling equipment depends on the industry and the materials to work with. Besides, there is a significant difference between those aimed to remove layers from metal or other materials workpieces and those designed to reduce particle size for materials that come in bulk.

Milling

The efficient size reduction of granular powders is a key step in many pharmaceutical processes, and choosing the right equipment for your application can

Conical mill for drug formulation - Making.com

https://making-tst.imgix.net/2017/09/1.jpg

caleva_process_solutions_2673_image-pdf

Caleva_Process_Solutions_2673_image.pdf

Enhanced data integrity with automatic data capture

Efficient formulation development through digital recipe management

Safety ensured with a high-integrity safety guard

Tool-less technology reduces downtime

Supports GLP requirements with detailed data logging

A tablet press consists of two essential tools, namely dies and punches. It compresses powder or granules into a desired solid substance of uniform size and weight. After filling the dies with powder or granules, upper and lower punches are pressed together within the die hole to form tablets. Then the upper punches come back to their original position while the lower punches help the ejection of the tablet from the dies.

Tablet presses

Granules

Pharmaceutical powders provide longer shelf life and better stability than liquid dosage forms. But the processing of pharmaceutical powders is crucial for growing segments besides pharmacy. Functional foods and cosmetics formulated with active ingredients and excipients depend on powdered forms to fulfill their promises.

Pharmaceutical powder

Entry level

In the field of pharmaceutical research and development, creating reliable, repeatable formulations requires fine control over granulation and

Bench-top mixer and spheronizer for formulation development - Making.com

https://making-tst.imgix.net/2024/09/Caleva_Process_Solutions_2673_image.png

Powder detergent is one of the most widespread washing solutions used in the laundry of fabrics. Since they contain no water, powder detergents are lighter than liquid detergent or pods, which results in cheaper transport and, thus, a more affordable choice for the end consumer. Although manufacturers can formulate their powder detergents differently, the detergent powder production process relies on a combination of builders, surfactants, and enzymes.

Powder detergent

Around a third of your natural protein composition is collagen. But the human body still finds good use for more of it, whether to reinforce joints or aid digestion. Collagen powder processing breaks the chains of amino acids into smaller units, allowing them to be consumed at higher concentrations without changing your diet.

Collagen powder

The click and puff of inhalers is a universal signal for respiratory conditions. Inhalers quickly grew into preferred drug delivery systems for asthma and COPD. Dry inhaler powder formulation produces a more stable drug than liquid dosage forms. Moreover, inhaler ingredients are more resistant to bacterial growth.

Dry inhaler powder

In 1682, Denis Papin found a method to remove collagen from animal bones, discovering gelatin. But it was the inventor Peter Cooper who developed gelatin powder processing. In 1845 he secured his invention with US patent 4084 for a dessert of gelatin powder called “portable gelatin”.

Gelatin powder

It took the scientific community almost 70 years to agree on the name ‘protein’ and discard the popular alternative, proteid. But protein powder processing still needed another five decades to be commercialized in the 1950s. Once extraction and purification could be industrialized, protein powder soon became a basic staple supplement.

Protein powder

Small footprint and ease of use - perfect for lab work

Fully height adjustable top and bottom spray arms gives more flexibility for less cost

Simple touchscreen controls with 21CFR part 11 compliant software for record keeping

Sampling system for monitoring results during the cycle

Fluid bed dryers use a stream of hot air to reduce the moisture content of powders and granules. This principle is often used for the production of high-quality pharmaceutical powders as well as the production of animal feed, minerals, sand, and dairy products.

Fluid bed dryers

Industrial drying machines are designed to remove moisture from your product. But the drying process must cater to variations in the state of matter and molecular structure of the input material. Industrial dryer technology exploits the modes of heat transfer (convection, conduction, radiation, evaporative cooling) to control the moisture content.

Drying

Industrial filtration equipment separates solid matter from liquid by using a filter medium. The filter allows only the fluid to pass through but retains the solid matter. The choice of filtration equipment depends on the particle size, the consistency of the mixture, and the nature of your product.

Filtration

Industrial separation equipment encapsulates the separation process which is to separate components of a liquid mixture, for recovering dissolved solids from liquids. The choice of a suitable technology depends on the identification of the key physical or chemical property, such as size, mass, density, or boiling point, which sets the product of interest apart from the rest of the components. Separation technology is widely used in the pharmaceutical and chemical industries for the isolation of active ingredients and high-purity chemicals. As well as in waste management and recycling industries.

Separation

liquid

Fluidised bed drying (FBD) is a common process in the pharmaceutical industry for drying compounds to achieve the required moisture content, as well as

Fluid bed dryer for lab scale - Making.com

https://making-tst.imgix.net/2017/09/Untitled.png

acg-pam-zro-brochure-pdf

ACG-Pam-ZRO-brochure.pdf

The two-piece capsule is a visual shorthand for all types of medical remedies. Advances in technology have made the production of hard-gelatin capsules a convenient delivery method for drugs and other ingested substances. But the simple solution requires micrometric precision to be manufactured to the proper pharmaceutical standards.

Hard gelatin capsules

The nonproprietary name for HPMC – hydroxypropyl methylcellulose – is such a mouthful that it has two abbreviations. Hypromellose is the other one. The non-ionized material offers a safe alternative to gelatin capsules, especially as most common API and excipients are suitable HPMC capsule ingredients.

HPMC capsules

Softgel capsules fast-track the delivery of medication to the bloodstream. Unlike solid pills, they do not need to be broken down by the body before the drugs can be absorbed. Moreover, they are optimal vehicles for oils and fat-soluble formulations that cannot be compressed into tablets.

Softgel capsules

Suppositories consist of active pharmaceutical ingredients encased in a non-active base material. The sustained release of medication makes suppositories a preferred option for the long-term treatment of chronic conditions like diabetes, anemia, and AIDS.

Suppositories

A dishwasher tablet is an essential detergent. It consists of a pressed mixture of sodium and potassium salts, surfactant, fragrance, and other filler agents, mixed with the help of tablet making machines. The products’ use in America and Europe is high, unlike in the Asian continent, where the price limits its usage. Its global market size will reach $990 million in 2026 from $475.6million in 2019, according to Grand View Research forecasts.

Dishwasher tablets

The wave of liquid soaps and detergents in the 1950s revolutionized home and personal care. Cheap and convenient, these off-the-shelf products fit perfectly into the lifestyle of the time. A few decades later, though, plastic waste put the sustainability of hygiene products into question. Refill tablet production technology answers that by eliminating single-use plastic. Instead of picking up a new bottle every time, end-users complete the formulation process in a multi-use container and with a simple instruction: just add water.

Refill tablets

High yield dosing from an automatic encapsulation machine

Capable of filling powders, granules, pellets, softgels, tablets, microtablets, and combinations

Easy and quick changeover and cleaning

Intuitive IPC interface with 21CFR Part 11 compliance

Capacity up to 90,000 capsules per hour

The two halves of a capsule shell are separately filled with your selected material before they are then pressed against one another and closed. Automatic capsule fillers orientate the shells in the precise position, fill them with your specified formula a join the ends. Capsules are then de-dusted and polished by micro brushes before they are ready for packaging.

Capsule fillers

Eating is more than just nutrition, but we have found ways to increase the nourishing power of our foods. Nutraceuticals manufacturing, from vitamin C powder and probiotics to omega 3 oil, is a concentration of natural ingredients and health supplements that complement our diets. While dietary supplements are not quite haute cuisine, the process of extraction and purification is no less a blend of science and art.

Nutraceuticals

Packaging

Continuous

Filling lines are used extensively in all industries, such as food, pharmaceutical, chemical, and cosmetics, to accurately package different products into a container suitable for that product. Although the filling process is at the very end of the production line, it is no less important than the earlier steps. Last but not least, the idiom that dates back to 1382 when John Wyclif wrote the firste the laste, and the laste the firste, indicates just that the last things on a list are just as valuable as the previous ones. In this case, this idiom fits perfectly.

Filling

At last, you reached the final stage of processing your product - welcome to the packing world! Packing preserves and protects a product from damage, spoilage, and contamination while it makes its way from the production line to the consumer or further production. Depending on which industry your products belong to, the type of primary packaging equipment can change drastically. You need to pay careful attention to products with chemicals or hazardous substances since they can be potentially dangerous to human health.

Packing

The capsule filler includes ACG-Pam's patented ZRO technology which minimizes dusting and separation by containing the formulation within the dosing disk.

Pharmaceutical manufacturers require maximum yield from their encapsulation process for efficient production and competitive results.  Leaving expensive

High-yield capsule filler - Making.com

https://making-tst.imgix.net/2015/07/ZRO-90T.jpg

Patented ZRM technology for optimized yield and minimal dusting

Left -over of 20-50 grams depending on the model, output, and formulation characteristics

No Capsule-No Slug feature reduces further reduces formulation loss and dusting

Micro-dosing capability with +/- 2 mg accuracy

Optional Rapid Transfer Port

The essential objectives of containment systems are personnel protection and preventing the release of toxic or infectious material into the environment. Containment is also used to prevent a product or sample from contamination by the external environment. In the chemical and pharmaceutical industries, containment solutions are used to protect the personnel from the leaking of airborne particles of hazardous substances, as powders or liquids are handled or transferred during processing.

Containment

The Securefill 12T from ACG-Pam is a fully automatic contained capsule filler for highly active substances.

For pharmaceutical formulations that are highly active specialized capsule filling equipment is often required for operator safety and protection of

Contained capsule filler - Making.com

https://making-tst.imgix.net/2015/07/7Securefill12T-scaled.jpg

acg-pam-af-series-brochure-pdf

ACG-Pam-AF-series-brochure.pdf

Fully automatic capsule filling with dose control

Single format part allowing experiments with up to four capsule sizes

Easy and quick changeover

Fills powder/pellets/tablets/micro-tablets/capsule-in-capsule and other combinations

ZRO technology minimizes dusting and minimizes product loss

The AF series from ACG-Pam is an automatic capsule filler line that is currently operated in over 1000 production facilities throughout the world.

Capsule filling should be a worry-step in pharmaceutical and nutraceutical manufacturing.  The right equipment is capable of fully automatic operation,

Automatic capsule filler - Making.com

https://making-tst.imgix.net/2015/07/4AF90T-scaled.jpg

acg_world_1225_brochure-pdf

ACG_World_1225_brochure.pdf

Easily scalable from R&D batches to pilot production

Interchangeable turrets for versatile tablet compression

Quick mechanical changeover in less than 30 minutes

InstAmend technology reduces downtime

Minimizes leftover powder, reducing formulation loss

Pilot

Compression

Drawing samples and testing them for conformity with preset quality standards allows manufacturing units to produce a consistent quality of the product. In a batch process, sample testing systems ensures that each batch meets the specified standards. In a continuous process, product and materials testing helps in the early identification of quality issues, saving significant time and resources, and preventing a sub-standard product from reaching the market. The selection of industrial testing equipment depends on the identification of key quality parameters. These parameters may include volume, weight, viscosity, hardness, particle size distribution, sterility, gauge and containment, among other parameters. Testing machinery need regular calibration to ensure that the parameters being tested are accurate. Some of the more common testing solutions include thermal imagers, scratch testers, optical inspectors and texture analyzers.

Testing

In pharmaceutical and nutraceutical industries, producing tablets in small and medium batches can present challenges, such as the need for precise control

Single rotary tablet press for small and medium-batch production - Making.com

https://making-tst.imgix.net/2024/09/ACG_World_1225_image.png

ci-precision-weight-checking-brochure-pdf

CI-Precision-weight-checking-brochure.pdf

Sort a variety of doses without downtime for parts change

Suitable for continuous operation at up to 500,000 units per 24 hours

Reclaims weight-rejected product, reduces wastage

Highly accurate CI Precision balance

GMP design, all contact components stainless steel or PEEK

In the pharmaceutical world, encapsulation refers to various techniques to enclose and protect the drug ingredients by forming the capsule shell. Encapsulation equipment changes depending on whether the manufacturer needs to produce a soft or hard gel capsule. For instance, encapsulation systems and machines for softgels control the entire process from start to finish because their shells are filled at the same time they are produced. On the other hand, the filling of hard gel capsules comes by separating the body from the cap, and after the filling operations, the two parts are sealed together again, forming the shell.

Encapsulation

Industrial measurement equipment is used as a crucial step before products leave the production line. These measuring instruments check for correct dosage and standards. Equipment for measurement and control employs a wide range of technologies to detect inconsistencies in volumes, sizes, weights, and fill levels as well as to inspect goods for quality against a set of criteria. Specialized measuring tools allow you to minimize the probability for error to its lowest possible, ensuring that both products and packaging meet your benchmarks.

Tablet Formulation Equipment

Which tablet formulation technology do you need?

Entry-level high-shear mixer for drug formulation

Conical mill for drug formulation

Bench-top mixer and spheronizer for formulation development

Fluid bed dryer for lab scale

High-yield capsule filler

Contained capsule filler

Automatic capsule filler

Single rotary tablet press for small and medium-batch production

There is currently no equipment listed with your specified properties, but we are sure we can help you. Try us!Contact us

What are you making?

Let's talk about your project!