operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Silicone milling Equipment

Milling machines are used to reduce the size of material by cutting, crushing, or grinding it. The choice of industrial milling equipment depends on the industry and the materials to work with. Besides, there is a significant difference between those aimed to remove layers from metal or other materials workpieces and those designed to reduce particle size for materials that come in bulk.

Milling

Despite only one letter difference, silicon and silicone are two different things. While silicon is the 14th chemical element on the periodic table, silicone is a synthetic material that, among other chemical elements, contains silicon. Although commonly observed as plastic, technically silicone is rubber. Among others, silicone processing equipment mainly involves several high-temperature machines, mixers and molds.

Silicone

After crushing and drying mined bentonite, this clay mineral is usually processed through a grinding mill into powder form. To maximize the capability of bentonite powder in hydration and water absorption, a combined milling and drying system with a higher lifetime of wearing parts is required to achieve desired fineness and product quality.


<h2>Mill for grinding and drying soft to medium minerals</h2>
The Pendulum Mill PM by NEUMAN &amp; ESSER is a roller mill used for fine grinding and drying minerals such as bentonite, clay, limestone, and others. It combines grinding, de-agglomeration, drying and classifying, making it an extremely robust and durable design.

The mill consists of a sturdy cast, mill housing, and a rotor with a crosshead and pendulums whose rollers run against a grinding ring crushing the bentonite material into fine sizes. Air transports the materials to the grinding zone through channels and rotating shovels. Both fine and coarse particles enter the classifier, where it separates coarse particles and sends them back to the mill for further grinding. The classifier speed can be adjusted to meet the requirements that come with the desired particle size distribution. Finally, the downstream collector receives the particles with the required final degree of fineness.

The Pendulum Mill PM can achieve upper particle sizes ranging from 10 μm to 1,000 μm (1,250 to 18 mesh). The various mill capacities can receive input quantities ranging from 0.5 t/h to 150 t/h and process feed material moisture of up to 35%.

Grinding and drying of bentonite

Widely used in the construction industry as filling materials, calcium carbonate is usually made from pulverized limestones. As a result, vibration and noise are typical issues during CaCO3 powder production processes, especially during grinding. Therefore, it is essential to have a classifier milling system to ensure low noise and low vibration while achieving the maximum particle fineness required in CaCO3 powder production.


<h2>Mill for fine grinding and drying of soft to medium-hard minerals</h2>
The Pendulum Mill PM by NEUMAN &amp; ESSER is a roller mill used for fine grinding and drying soft to medium-hard materials such as clay, bentonite, limestone, and many other minerals. It is a robust and durable design of combined grinding, de-agglomeration, drying, and classifying system.

The mill consists of a sturdy cast, mill housing, and a rotor with a crosshead. The grinding roller travels on the rings, whose centrifugal action against the grinding ring reduces the minerals into finer sizes. Rotating shovels guide the particles from the mill bottom to the grinding zone. The air system then transports the ground particles to the classifier, where it rejects coarse particles and sends them back to the mill for further grinding. The speed of the classifier can be adjusted to meet the required particle size and distribution. Finally, a downstream collector receives the particles with the necessary final degree of fineness.

The Pendulum Mill PM can achieve narrow particle size distribution with an upper particle size ranging from 10 μm to 1,000 μm (1,250 to 18 mesh). The mill capacity ranges from 0.5 t/h to 150 t/h and can process up to 35% humidity material.

Grinding and drying of CaCO3

Find production technology for Silicone milling, and connect directly with leading machine manufacturers worldwide

Silicone milling

Silicone milling - Making.com

https://making-tst.imgix.net/2021/06/Silicone-image-scaled.jpg

Home

The marketplace for finding innovative production technology

Making.com

https://making-tst.imgix.net/2022/12/makingCopy.png

Silicone milling Equipment

Which silicone milling technology do you need?

Grinding and drying of bentonite

Grinding and drying of CaCO3

There is currently no equipment listed with your specified properties, but we are sure we can help you. Try us!Contact us

Let's talk about your project!