operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Body Lotion Homogenization Equipment

Homogenization is the process of reducing particle size in mixtures to improve the consistency, uniformity, and stability of the product. The choice of a homogenizer depends on the nature of the product, desired particle size, the physical state of the ingredients, and pressure requirements during the process. Homogenization is widely used in the biotech industry for cell lysis and in the pharmaceutical industry for the emulsification of creams and ointments; it also finds applications in the cosmetics and food industries for improving the consistency and uniformity of various products.

Homogenization

Every minute, your skin loses between 30,000 and 40,000 dead skin cells. This means losing millions of cells every day, which makes your skin look less glowing. Being a moisturizing agent, body lotion has the power to hydrate your skin and  give the glow back to it. Production involves water and oil phases, which you then mix with an emulsifier and blend until homogeneous. Preservatives are essential for any solution containing water for the prevention of microbial growth.

Body lotion

Equipment operating under the rotor/stator principal is often employed when more traditional methods of stirring cannot achieve desired results. High performance continuous dispersing equipment is needed to achieve desirable results for almost any mixing process in circumstances where other machines fail.
<h2>Rotor/stator mixing in a robust and simple package that is easy to clean</h2>
The IKA ULTRA-TURRAX UTL 2000 is inline high-performance single-stage dispersing machine used for the production of emulsions and suspensions. The UTL 2000 uses the rotor/stator principle and is best suited for continuous applications that cannot be accomplished using conventional stirring methods.

During the full continuous process the components to be mixed are fed into the machine at an appropriate rate through various inlet connections. These components are then thoroughly mixed, dispersed or homogenized within the machine and discharged from the machine through the outlet. Thus, all particles or droplets are treated producing a narrow particle or droplet size distribution with minimal concentration/quality variations. Additionally, the UTL 2000 creates a pumping action which can be used for transfer purposes at low to moderate viscosities with a maximum of about 20 m (ca. 2 bar).

The machines are designed for easy and reliable scale-up and sizes are available with throughput from 50 to 125.000 liters per hour.

Dispersing machine for emulsions and suspensions

For products of medium viscosity and relatively consistent particle size such as honey, cremes, and some plastics, a simple, low cost mixing machine is useful to ensure even dispersion.  The most efficient production plants take advantage of such equipment in continuous production processes to minimize required floor space and serve double-duty as mixing and pumping/transfer equipment.
<h2>A basic effective mixing machine with transport pump capabilities and low cost</h2>
The lower-priced ULTRA-TURRAX UTL 1000 machines from IKA are particularly multifunctional and are used for the mixing, dispersing (emulsifying/suspending) and homogenizing of solid and liquid substances up to viscosities of several thousand mPa·s, such as honey, plastic masses and crèmes. The mixing components are fed into the machine at the inlet connection. The materials are mixed, homogenized and then discharged from the machine via the outlet connection. The economic dispersing machine does not have automatic suction, but does have a conveyor height of up to 20 meters.  Units are available with flow rates from 4.800 to 125.000 liters per hour.

&nbsp;

Economic dispersing machine for emulsions and suspensions

Certain mixing tasks present unique challenges and manufacturers need equipment that is specifically designed to handle them.  When a single pass process is needed, high solid concentrations are involved, the ingredients quickly react with one-another, the product is sensitive to air inclusions, or the solid is granular and needs to be mechanically crushed as well as mixed, the right equipment is needed to get the job done.
<h2>A single pass mixer, disperser, and homogenizer for difficult mixing tasks</h2>
IKA's MHD-2000 system is a continuous homogenizing system designed for the high quality dispersions of solids in liquids.  The system includes two horizontal liquid connections and one vertical connection for solids.  the liquids and solid components of the mixture are brought together in a controlled fashion in a pre-mixing chamber in which the liquid is evenly distributed by entering through several different apertures.  Immediately after mixing, the liquid and solid components are dispersed through a rotor/stator system with high shearing action creating a high quality, output product that is free of agglomerations.

Use of this system greatly reduces production times due to its continuous operation.  Its design allows it to process highly viscous liquid ingredients, mixtures with solid contents up to 80%, and even solids that are granular and must be mechanically crushed during the mixing process.  Units are available with throughput volumes from 60 and 40.000 liters per hour.
<h4></h4>

Continuous homogenizing system

When extremely high accuracy is required in your recipe or formulation traditional mixing machines often give unsatisfactory results.  For precisely controlled, quantitative mixes of liquid and solid ingredients you need a machine with better control designed to create a ready-to-use product that meets your exact requirements every time.
<h2>Create precise, quantitative mixes and fine suspensions in a single pass</h2>
The Dispax-Reactor from IKA is a purpose-built high accuracy homogenizing system for the food, chemical, pharmaceutical, and other industries.  It achieves extremely accurate mixes and suspensions by dosing both the liquid and the solid phase into the mixing chamber unlike traditional mixers which typically only dose the solid.  In this way the exact quantities of the raw materials in the final product are known regardless of variations in the physical characteristics of inputs.  The units include three distinct dispersing stages which allow for the creation of extremely fine suspensions from a wide range of solid raw materials.  Different rotor/stator dispersing heads are available allowing the machine to be optimized to your particular process.  Capacities are available from 500 to 35.000 liters per hour.

High accuracy homogenizing system

Manufacturers need production mixing equipment that is capable, flexible, and easy to maintain. Accurate mixing form a reliable, user friendly machine will give plant managers the peace of mind and worry free operation they need to focus on improving other areas of their process. A high quality piece of equipment allows for low maintenance, easy cleaning, enables the direct feed of solids and liquids, mixing and dispersing of the vessel contents, heating or cooling of the product, and processing under vacuum or under pressure.
<h2>A universal mixing system with precise, reproducible results and safe operation</h2>
The Master Plant homogenizing and emulsifying system from IKA was designed specifically to meet the production mixing needs of the pharmaceuticals industry but has also proven useful in the production of food, beverages, cosmetics, and chemicals.  Several mixing heads are interchangeable depending on the process and desired results.  Each mixing head can be heated or cooled to control product temperature simultaneous to the mixing process. Flexible PTFE scrapers move with the mixing head and keep product from adhering to the vessel walls. Products of up to 100.000 mPas viscosity can be processed.  The GMP homogenizing systems  can be fully discharged without the need for additional pumping and are available in capacities from 10 to 4.000 liters.

GMP homogenizing system

Manufacturers of cosmetic products need mixing equipment that is capable, flexible, easy to maintain, and low-cost to stay competitive.  Accurate mixing from a reliable, user-friendly machine will give plant managers peace of mind and worry-free operation to focus on improving other areas of their process.
<h2>Consistent mix quality from an easy-to-use, low-cost system</h2>
IKA's SPP Standard Production Plant is a simple yet very capable system for all standard mixing processes, such as homogenizing, emulsifying, stirring, and dispersing ingredients.  The emulsifying system includes a robust anchor agitator with a fixed flow breaker which moves the entire batch volume even for mixes of high viscosities.  A highly advanced scraper design keeps the vessel walls free from scaling, and unique vessel geometry allows the processing of small batches down to 30% of the rated working volume.

The system includes interchangeable dispersing tools and adjustable speed control, dispersing quality and options for a heated or cooled double-walled vessel, and vacuum degassing of the working chamber, among others.  The unit is easy to clean using a CIP system, and maintenance and inspection is simplified by concentrating major components in easily accessible areas.  This design also helps keep the required floor space of the units as low as possible. The SPP is available in working capacities from 25 to 4.000 liters.

Cost-effective homogenizing and emulsifying system

Producers in a wide variety of industries benefit from equipment that can continuously create highly accurate homogeneous mixtures of liquid and solid ingredients.  The use of a continuous process requires less floor space for storage and greatly reduces production times.  Closed systems eliminate the creation of dust thereby enhancing safety and efficiency.  Equipment that offers all these characteristics will give its users an edge over the competition.
<h2>Continuous dispersion of solids into liquids without the generation of dust</h2>
IKA's mixing Plant MHD includes a mixing machine, metering units, an electrical control system, and peripheral equipment which is customized to meet the customer's facility and process needs.  The Plant MHD is a homogenizing system that allows the dust-free mixing of liquids and solid granules or powders in a continuous process.  The ingredients are continuously fed into the plant's working chamber in the precisely controlled ratios required by the final product, where they are mixed and then dispersed.  In this way, a ready-to-use final product is produced in just one pass.

The units can handle mixtures of up to 80% solid content and viscosities of up to 50.000 mPas.  Since the only agitation of the solid occurs within the machines working chamber after the liquid components have been introduced, no dust is generated.  A wide variety of solid feeding systems is available and IKA can help select the process that is best suited to your needs.  The Plant MHD unit is available with capacities from 200 to 40.000 liters per hour.

Dust-free continuous homogenizing system

Innovators in process development need laboratory equipment that helps their ideas be reliably scaled up to production.  For dispersion equipment, this requires important process parameters like circumferential speed, tool, and mixing chamber geometry to be structurally identical to production level equipment.
<h2>A highly adaptable dispersion machine for the lab, designed for reliable scale-up</h2>
IKA's Labor-Pilot is a versatile, compact, and highly reliable inline laboratory dispersing machine.  It is designed for solid-liquid mixing, homogenizing, emulsifying, suspending, and wet milling.  It is designed specifically to match process characteristics of larger dispersion machines so developed processes can be reliably scaled up.  The units can work at elevated temperatures, pressure/vacuum conditions, and with abrasive substrates.  Changeout between the several different working modules is quick and easy with each module giving the machine the particular characteristics needed to perform particular tasks and work with a particular type of product.  Compared to stirrers, mixing time for a wide variety of dispersions from coarse to fine can be reduced by up to 50%.

Pilot dispersing machine for testing and scale-up

Innovators in a wide variety of industries need laboratory equipment on which processes and products can be developed and reliably scaled up to production.  For dispersion equipment, this requires important process parameters like circumferential speed, tool, and mixing chamber geometry to be structurally identical to production level equipment.
<h2>A highly adaptable dispersion machine for the lab, designed for reliable scale-up</h2>
IKA's Processs-Pilot is a versatile and highly reliable inline laboratory dispersing machine.  It is designed for solid-liquid mixing, homogenizing, emulsifying, suspending, and wet milling.  It is designed specifically to match process characteristics of larger dispersion machines so developed processes can be reliably scaled up.  The units can work at elevated temperatures, pressure/vacuum conditions, and with abrasive substrates.  Changeout between the several different working modules is quick and easy with each module giving the machine the particular characteristics needed to perform particular tasks and work with a particular type of product.  Compared to stirrers, mixing time for a wide variety of dispersions from coarse to fine can be reduced by up to 50%.

&nbsp;

In-line laboratory dispersing machine

Processes including homogenization, dispersing, suspension, emulsification and dissolving benefit with the addition of a dispersing rotor/stator system to the functionality of traditional overhead stirring equipment.  With traditional equipment, achieving desired results in high viscosity media is often difficult and slow and issues such as sediment formation and air inclusions are common.  Adding a high speed rotor and jet pipe in close proximity to the mixing vane greatly enhances the process and helps avoid many of these issues.
<h2>Fast and efficient agitation of highly viscous fluids</h2>
IKA's Rototron RTS is a line of agitators that uses jet-flow technology to speed mixing processes while avoiding many of the issues seen when more traditional equipment is used.  The jet flow agitators use a high speed rotor and jet pipe in close proximity to the mixing vanes to disperse and circulate products within a vessel while avoiding inefficiency caused by back flow, air inclusions caused by a static whirlpool effect, and the need for flow breakers caused by continuously rotating mixtures.  The circulation mechanism also avoids the common issue of sediment formation when being used to produce emulsions.  The units can be used with open and pressurized vessels and mounting options exist to accommodate a wide variety of vessels and configurations.  With this equipment, no seal material makes contact with the product and food or pharmaceutical grade versions are readily available.  Motor sizes are available from 2,2 to 15 kW with max batch sizes from 1.000 to 20.000 liters.

Jet flow agitator for high-viscosity media

When processes call for homogenized emulsions with extremely fine particle sizes the traditional toothed ring dispensers are not always sufficient.  For extremely high levels of disintegration required to produce true micro-emulsions, extreme pressure cycling is more successfully used.
<h2>Homogenization with pressure shock to achieve extremely small particle sizes</h2>
The HPH High Pressure Homogenizer from IKA uses one or more piston pumps to apply pressure up to 2000 bar to the liquid medium to be homogenized.  The fluid is then fed through a homogenizing valve which very quickly reduces the pressure to the atmosphere.  This abrupt change in pressure in the moving fluid causes cavitation, a high degree of turbulent flow, and internal shearing forces in the fluid all of which serve to break up and distribute larger particles forming a very fine emulsion.  The pressure applied on the uphill side of the homogenizing valve is infinitely adjustable as is the flow rate through the valve, so the process can be easily adapted to achieve a wide range of outcomes and to accommodate fluids with different flow characteristics.  All parts that contact the product flow are stainless steel and autoclavable and the entire unit is designed for robustness and long service life.

High-pressure homogenizer

<span style="font-weight: 400;">The production of high quality pharmaceuticals often requires mixing of suspensions and similar solutions. A key challenge to overcome is the unwanted incorporation of air to the mix. Air incorporation causes major problems in processing and end-product quality. Air in the product may </span><span style="font-weight: 400;">cause excessive foaming, increased fouling in heat exchangers, and cavitation in homogenizers. A modern vacuum mixing solution can overcome these problems, as well as ensuring efficient operations with longer production hours, lower maintenance costs, and a safe, high-quality end product.</span>
<h2>Mobile and fixed vacuum mixing units for pharmaceutical production</h2>
<span style="font-weight: 400;">The vacuum mixer range from Ipros has been designed specifically for the pharmaceutical industry, and units are tailor made to suit your exact solution production requirements.</span>

<span style="font-weight: 400;">Based on an all-stainless GMP frame design, the vacuum mixer range is available with vessel sizes from as small as 30 litres up to 500 litres in a portable format, and from 500 litres up to 1000 litres in fixed format with forklift supports. This makes the range suitable for all scales of production.</span>

<span style="font-weight: 400;">The Ipros vacuum mixer units can run with a vacuum down to -1 bar, and can be specified with heating or cooling elements, and as insulated or non-insulated vessels as your requirements dictate. All vessels can be designed to connect to a wide variety of automated, semi-automated and manual process systems for simple integration.</span>

<span style="font-weight: 400;">Perfect for use in the most stringent pharmaceutical production environments, the vacuum mixers have integrated cleanable and sterilisable energy connections, GMP motor and utility housings, and are supplied with an operator panel and software allowing for full process control. These mixers can be used for any ATEX compliant executions.</span>

Vacuum mixer for suspensions

<span style="font-weight: 400;">Homogenization (or pharmaceutical micronization) is the process of reducing particle sizes, and is a vital step in making pharmaceutical creams and ointments more stable and clinically effective, and in producing high quality cosmetics. Homogenizing under vacuum produces the highest quality results, and a bespoke plant built to your exact requirements will increase your productivity and quality.</span>
<h2>Homogenization plants for the pharmaceutical and cosmetic sectors</h2>
<span style="font-weight: 400;">The homogenization plants from Ipros are a custom-built solution for the manufacture of high quality creams, ointments and other suspensions, whether under pharmaceutical or non-pharmaceutical production conditions.</span>

<span style="font-weight: 400;">Ipros modular design allows full configuration over mixing and homogenising equipment. Options range from vacuum processing to processing under the most stringent sterile and/or toxic conditions. The integrated engineering of the counter-rotating gearbox brings mixing, homogenising, cleaning, sterilisation, and drying systems together into one validated piece of equipment.</span>

<span style="font-weight: 400;">A range of solutions for Clean in Place and Sterilise in Place (CIP and SIP) can be selected to fit your exact production needs, and Ipros is pleased to offer the highest performing CIP/SIP performance currently available on the market, perfect for stringent pharmaceutical production.</span>

Homogenizer for creams

Producing high-quality lotions, creams, and gels requires specialized equipment due to the complexity of mixing and homogenizing high-viscosity products. This ensures uniform texture and optimal product quality, which traditional methods often fail to achieve efficiently.
<h2>Homogenize and mix with precision and speed</h2>
The EKATO UNIMIX vacuum processing units offer a versatile solution for producing various high-viscosity products such as lotions, creams, gels, and toothpastes. Combining the patented EKATO PARAVISC impeller and the EKATO S-JET homogenizer, these units ensure rapid, effective mixing and homogenization. The PARAVISC impeller provides excellent axial mixing, while its open design allows for the use of a central baffle and wall scrapers, optimizing heat transfer. The S-JET homogenizer is designed for internal and external homogenization, enabling swift and precise product dispersion. The system supports capacities ranging from 100 liters to 20,000 liters and includes features like heating and cooling functions, automated feeding, and Cleaning in Place (CIP) systems. It meets ASME, PED, and SELO standards, ensuring reliable performance across industries such as cosmetics and pharmaceuticals.

Vacuum processing units for high-viscosity products

Managing the agitation and mixing of high viscosity products poses significant challenges in maintaining consistency, temperature, and homogeneity. Processes involving complex fluid behaviors require specialized agitators to ensure effective mixing and heat transfer, preventing product degradation.
<h2>Optimize mixing and heat transfer for viscous products</h2>
The MCR Counter-rotating Agitator by INOXPA is designed to handle the mixing and homogenization of medium to high viscosity products. It features two coaxial shafts with independent geared motors rotating in opposite directions. The central shaft operates at higher speeds with propellers for dispersing low-viscosity phases, while the outer shaft, equipped with an anchor and scrapers, removes product from tank walls and acts as a deflector for the central propellers. This configuration ensures efficient heat transfer and prevents overheating. It is particularly suitable for processes with variable viscosity, featuring a variable frequency drive for adjustable rotation speeds. Compliant with EHEDG guidelines, it supports CIP and SIP processes, and is configurable with various options including surface finishes and ATEX certification.

Counter-rotating agitator for high viscosity products

Did you know that in the 30s, cosmetic creams that contained radioactive material were booming on the market because they promised to reduce wrinkles? Thank God that's no longer the case. To make a cosmetic cream today, you need to create a stable mixture of oil and water and add an emulsifier to join these otherwise immiscible substances.

Cosmetic creams

A cosmetic foundation comes in a powder, cream, or liquid form. And did you know that the liquid form came about because women in the 30s and 40s didn't want to wear stockings? So to cover up their legs, they turned to leg makeup, which played an essential role in our liquid foundation formula. The foundation making process involves balancing the oil and water phase interactions during the formulation stage, mixing ingredients, and packaging using a liquid foundation filling machine.

Cosmetic foundation

The most significant decision when making ointments is likely to be the choice between automatic or semi-automatic processes for it. This impacts on individual phases of the ointment cream manufacturing process - the water phase and oil phase.

Ointment

ProXES specializes in liquid and semi-liquid foods, cosmetics, and pharmaceuticals process machines and lines. ProXES partners from co-creating first ideas,developping tailor-made concepts, go to market and scaling production.

Have you wondered how to elevate the process of making cosmetic emulsions? We have a solution for you!



<a href="https://www.proxes.com/de/">ProXES</a> is hosting a webinar for <a href="https://go.proxes.com/en/cosmetic-emulsions-webinar">cosmetic emulsions</a> on the 27th of February, where they shed light on cold-pressing cosmetics. The webinar explains how the technology not only makes your products better but also makes the process more energy-efficient and environmentally friendly.

Webinar: cold-pressing cosmetics for sustainability

According to a legend, Cleopatra soaked her sails in her perfume so that Mark Antony could smell her ships before they arrived. This is to say that, from soaps and shampoos to perfumes, conditioners and pomades, cosmetics have always been highly valued and used for their properties of aesthetic enhancement. Cosmetics are a broad class of topical agents applied for various purposes such as cleansing, protecting, beautifying, or otherwise altering your appearance. As a result, a wide array of processing equipment is used in the cosmetics industry.

Cosmetics

The topical route is a convenient route for the self-administration of drugs. But turning a pharmaceutical formulation into an easy-to-use cream involves specialized cream manufacturing equipment. Topical dosage forms are essentially an emulsion of oil and water.  But the ratios can be changed to process it into lotions, ointments, and gels.

Cream

Find production technology for Body Lotion Homogenization, and connect directly with leading machine manufacturers worldwide