operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Veterinary tablets drying Equipment

Industrial drying machines are designed to remove moisture from your product. But the drying process must cater to variations in the state of matter and molecular structure of the input material. Industrial dryer technology exploits the modes of heat transfer (convection, conduction, radiation, evaporative cooling) to control the moisture content.

Drying

There are slight differences between human and animal pharmaceuticals, but that dissimilarity is enough to create new production challenges. Veterinary tablets formulation reflects the diversity of enzymes that different species use to break down substances. Although the methods involved are comparable to human drug manufacturing, equipment and processes need to adapt to a wider dosage variability in veterinary tablets.

Veterinary tablets

It is not always possible to duct out the wet air from a dehumidifier servicing an enclosed facility. In such cases, the water is condensed out from the wet air flow and disposed off through a floor drain or a pump.


<h2>Dehumidify at sub-zero dew points with an air-chilled condensation dehumidifier</h2>
AQUASORB dehumidifiers from Seibu Giken function as a Consorb but condense the wet air flow in an air-chilled condensor instead of being lead out. These dehumidifiers have a high dry airflow, which improves the drying effect. It incorporates a next generation, washable, D-MAX silica gel dessicant rotor.

The chassis is made of stainless steel which is especially important in condensing units to prevent corrosion. Aquasorb can operate at dew points below 0°C. The fan for dry air and cool air helps accumulate the energy in the dry air.

Capacity
AQUASORB A-30B/BP: 0.5kg/h*, dry air flow rate: 400m3/h
* at 20°C and 60%RH

Sorption dehumidifier with air-chilled condenser

Water damaged areas require dehumidification to limit the damage and prepare the area for restoration. A handy, portable dehumidifier that is easy to setup and works silently is ideal for such applications. Dehumidifying can be particularly problematic in tropical conditions with high ambient humidity.


<h2>A small portable dehumidifier fit for climates with high humidity</h2>
The CONSORB CS series dehumidifiers from Seibu Giken use the Consorb principle. They are ideal for facilities with surplus heat or when dehumidifying very damp air. They are also useful when there is a large difference in moisture content between process and regeneration air inlets. Consorb CS dehumidifiers are fitted with a self regulating heater and a high quality, washable, D-MAX silica gel rotor.

The CONSORB CS has been designed as a very silent, compact and handy dehumidifier that can be easily placed indoors and in smaller areas. The corrosion resistant chassis is made of stainless steel. CS units deliver high performance in all climates.

Capacity
CS-5/-5L: 0.35 - 0.4kg/h*, dry air flow rate: 65 - 90m3/h
* at 20°C and 60%RH

Small portable dehumidifier

Small, humid areas can be difficult to dehumidify in humid ambient conditions such as those in tropical climates. A large difference in moisture content between process and regeneration air can be problematic during dehumidification. Processing and storage facilities that require deep drying can be especially difficult to dehumidify in these conditions.


<h2>Dehumidify areas with a large difference between incoming and required moisture content</h2>
The CONSORB DC series dehumidifiers from Seibu Giken use the Consorb principle. They are ideal for facilities with surplus heat or when dehumidifying very damp air. They are also useful when there is a large difference in moisture content between process and regeneration air inlets. DC dehumidifiers incorporate the new generation of high quality, washable, silica gel desiccant D-MAX rotor

DC series units are small, portable and light-weight with the smallest units weighing as little as 15Kgs. They have a maintenance-friendly, rust free, stainless steel chassis. The DC range offers a self-regulating heater and a protected control panel.

Capacity
DC-10: 0.6kg/h*, dry air flow rate 190m3/h
DC-20/30 T10, T16: 1.1 – 1.5kg/h*, dry air flow rate 310 - 400m3/h
* at 20°C and 60%RH

Sorption dehumidifier for large temperature differences

Humid ambient conditions such as those in tropical climates make dehumidification more challenging as there is a large difference in moisture content between process and regeneration air. Processing and storage facilities that require deep drying can be especially difficult to dehumidify in these conditions.


<h2>Dehumidify very damp air in tropical climates with deep drying</h2>
The CONSORB CZ series dehumidifiers from Seibu Giken use the Consorb principle. They are ideal for facilities with surplus heat or when dehumidifying very damp air. They are also useful when there is a large difference in moisture content between process and regeneration air inlets. CZ dehumidifiers incorporate the new generation of high quality, washable, silica gel desiccant D-MAX rotor

CZ series units can work with hot water for regeneration or with water in combination with an electric heater. In addition, electricity, steam and gas can also be used for regeneration. The CZ dehumidifiers are made with aluzinc and have an excellent deep drying ability. An ICE-version with higher process airflow, ideal for re-circulating installations, is also available.

Capacity: 22 – 69kg/h*,dry air flow rate 3,200 – 8,000m3/h
* at 20°C and 60%RH

Sorption dehumidifier for deep drying

Sealed rooms can be challenging to dehumidify with ordinary dehumidifiers. The wet air needs to be recycled and water removal must be by way of condensation. Condensing units can have high energy requirements if heat is not properly recycled.


<h2>Dehumidify sealed rooms and wet airflows efficiently</h2>
FRIGOSORB dehumidifiers from DST Seibu Giken are built on the patented Frigosorb sorption technology. These dehumidifiers are very energy efficient due to their heat pump function and use approximately one-third of the total energy consumption of regular sorption dehumidifiers. They incorporate the new generation of high quality, washable, silica gel desiccant D-MAX rotor

The F-31 unit works well at low temperatures. The chassis is made of stainless steel which prevents corrosion in condensing units. It is especially suited for sealed rooms as it condenses out the water. Applications include sealed pharmaceutical and health facilities, food processing and storage of sensitive goods.

Capacity:
F31: 1.1kg/h*, dry air flow rate 850– 400m3/h
* at 20°C and 60%RH

Dehumidifier for difficult wet airflows

Small humid spaces, used for processing or storage, often need a simple dehumidification solution. A single-phase powered dehumidifier with a compact, maintenance friendly design is ideally suited to these situations. Energy efficiency and low noise level operation are also important when working in small spaces.


<h2>Dehumidify small rooms with light weight &amp; efficient heat recycling technology</h2>
RECUSORB DR series dehumidifiers are built on the DR sorption technology from DST Seibu Giken. They incorporate the new generation of high quality, silica gel desiccant D-MAX rotor, a self regulating heater and integrated heat recycling technology. Heat is recycled, to pre-heat and partly dehumidify the incoming air. It uses a fan for both the dry airflow and the wet airflow making installation simpler in rooms with over pressure. They are also suitable for achieving very low dew points.

DR series dehumidifiers are suitable for small storage areas, archives, museums and other small spaces. The single-phase, compact DR-units have a stainless steel construction and offer a long life of robust performance.

They are available in the following capacities:
DR-31 T10: 1.6kg/h*, dry air flow rate 310m3/h
DR-40 T10/T16: 1.6-2.8kg/h*, dry air flow rate 550– 600m3/h
DR-010B: 0.5kg/h*, dry air flow rate 190m3/h
* at 20°C and 60%RH

Sorption dehumidifier for overpressured rooms

Facilities that handle large amounts of water can become very humid. High humidity may lead to corrosion in installed machinery and control systems. A dehumidifier is necessary to protect the installed machinery in these cases. The dehumidifier itself must have a robust construction to withstand these harsh conditions.


<h2>Dehumidify medium sized spaces with robust heat recycling technology</h2>
RECUSORB R series dehumidifiers are built on the Recusorb R sorption technology from DST Seibu Giken. They incorporate a washable, silica gel desiccant rotor and integrated heat recycling technology. Heat absorbed during rotor regeneration is recycled to pre-heat and partly dehumidify the incoming air.

The compact R-units have a stainless steel construction and offer a long life of robust performance in both indoor and outdoor settings. They are suitable for small to medium sized storage and processing facilities as well as museums, power plants and pumping stations.

The R series dehumidifiers are available in the following capacities:
R-060BR: 4.6kg/h*, dry air flow rate 1,000m3/h
R-51/61R: 7.3-10kg/h*, dry air flow rate 1,250– 1,450m3/h
* at 20°C and 60%RH

Heat recycling sorption dehumidifier

Dehumidification of medium sized manufacturing and processing facilities can be a daunting task considering the setup and maintenance effort associated with ordinary dehumidifiers. A compact dehumidifier, that's energy efficient and easy to setup and maintain, can greatly simplify the dehumidification process while lowering costs.


<h2>Dehumidify medium sized facilities with compact, service friendly, energy efficient technology</h2>
RECUSORB RL industrial dehumidifiers are built on the Recusorb R sorption technology from DST Seibu Giken. They incorporate the new generation of high quality, silica gel desiccant D-MAX rotor and integrated heat recycling technology. Heat absorbed during rotor regeneration is recycled to pre-heat and partly dehumidify the incoming air.

The compact RL-units are easy to service with easy access to filters, rotor and seals. Optional features include linear capacity control and frequency inverter to control airflows. They are suitable for extending life of stored products in small to medium sized warehouses, preventing condensation in cold stores &amp; ice rinks and ensuring desired ambient humidity in manufacturing facilities.

The RL series dehumidifiers are available in the following capacities:
RL-60R/LR : 4-5kg/h*, dry air flow rate 850– 1,000m3/h
RL-71R/ ICE/ LR: 13-17kg/h*, dry air flow rate 2,500– 3,200m3/h
* at 20°C and 60%RH

Industrial desiccant dehumidifier

Moisture sensitive processing and storage facilities need low humidity environments to safequard the quality of products. Large spaces require specialized dehumidifiers that have the necessary capacity and good energy efficiency to keep costs at a minimum. An industrial, automated humidity control system is best suited for these applications.


<h2>Dehumidify large facilities with high efficiency heat recycling technology</h2>
RECUSORB RZ industrial dehumidifiers are built on the Recusorb R sorption technology from DST Seibu Giken. They incorporate a silica gel desiccant rotor and integrated heat recycling technology. Heat absorbed during rotor regeneration is recycled to pre-heat and partly dehumidify the incoming air. They are available with electric, steam or gas reactivation.

RZ dehumidifiers have an aluzinc construction and offer multiple PLC control options. They are available in the capacity range 19 - 65kg/h (at 20°C / 60%RH) and dry air flow rate 2,800 – 10,500 m3/h. Some applications include preventing clumping of dried foods during processing, protecting hygroscopic materials in pharma manufacturing, excluding moisture during packaging, extending life of warehoused products and preventing condensation in cold stores and ice rinks. They are also available in an ICE-version with higher process airflow, ideal for re-circulating installations.

Large scale desiccant dehumidifier

Dehumidification needs can vary significantly from one project to another. Dehumidifiers with a fixed configuration therefore do not always fit your needs. A flexible dehumidification system that can be tailored to meet your requirements from basic desiccant dehumidification to a complete climate control system becomes useful in this situation.


<h2>Dehumidify with a customized solution that fits your processing needs</h2>
FLEXISORB from DST Seibu Giken is a versatile industrial dehumidifying system that can be configured to meet your particular needs. Flexisorb dehumidifiers use the Recusorb R sorption technology which incorporates a silica gel desiccant rotor and integrated heat recycling. Heat is absorbed during rotor regeneration and recycled in the “purge zone” where incoming air is pre-heated and partly dehumidified.

Flexisorb systems are available in the capacity range 19 - 300kg/h (at 20°C / 60%RH) and dry air flow rate of 900 – 61,100 m3/h. Options include pre-cooling, post-cooling and post-heating. Flexisorb has an anodized aluminum frame with a smooth interior design and external locks. Some applications include preventing clumping of dried or powdered foods during processing, protecting hygroscopic materials in pharma manufacturing, excluding moisture during packaging and extending life of warehoused products.

Customizable dehumidifier

<span style="font-weight: 400;">A complete granulation line allows for the mixing and granulation of pharmaceutical compounds for the production of tablets. By linking fully compatible milling, mixing and fluid bed machinery with vacuum conveying it provides a turnkey solution for preparation of powder doses ready for pressing into tablets.</span>
<h2>Complete solution for preparation of granular pharmaceutical compounds for tablets</h2>
<span style="font-weight: 400;">Sejong Pharmatech’s Granulation Line is the most cost-effective way to achieve a turn-key granulation solution for the manufacture of pharmaceutical compounds for tablet preparation.</span>

<span style="font-weight: 400;">The granulation line consists of the Sejong CM series production scale conical mill, the Sejong M series production-scale speed mixer, the Sejong D series production scale fluid bed dryer and an optional vacuum conveyor system for the creation of a completely closed line environment.</span>

<span style="font-weight: 400;">Designed for total compatibility, these devices work together seamlessly to provide the perfect input for tablet pressing machines. When buying as a line package, significant cost savings can be made compared to sourcing individual machines.</span>

<span style="font-weight: 400;">The optional vacuum conveyor removes the need for manual handling between processes, and ensure a clean and safe transfer of powders between process stages.</span>

<span style="font-weight: 400;">All the Sejong machinery is manufactured with ergonomics and ease of use in mind, and the touch screen HMI’s are fully 21CFR part 11 compliant.</span>

Granulation line of mixer and fluid bed dryer

In laboratory-scale applications, achieving efficient drying, granulation, and coating processes while conforming to solvent processing regulations is critical. Limited space, need for flexibility, and stringent safety standards pose additional challenges in these environments.
<h2>Perform drying, granulation, and coating processes</h2>
The FC-LAB Mini FLO-COATER® from Freund is a self-contained development fluid bed system designed for laboratory-scale applications that require solvent processing. The system includes a unique combination product container and Wurster processing insert, eliminating the need for additional costly components. With a capacity range of 0.8L to 2.5L, it offers flexibility in processing activities and comes equipped with a product sampling port and HEPA filters for both inlet and exhaust. For ease of use, it features an integrated peristaltic pump and a color touchscreen control system for automatic (recipe driven) and manual modes. The FC-LAB Mini is compliant with UL, CE, NFPA, and CSA design standards, and meets Class 1, Division 2 and ATEX Zone 2 safety standards.

Laboratory fluid bed system for solvent processing

Find production technology for Veterinary tablets drying, and connect directly with leading machine manufacturers worldwide

Veterinary tablets drying

Veterinary tablets drying - Making.com

https://making-tst.imgix.net/2021/06/Veterinary-tablets-making-equipment-2-scaled.jpg

Home

The marketplace for finding innovative production technology

Making.com

https://making-tst.imgix.net/2022/12/makingCopy.png