operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Changemakers

Industrial drying machines are designed to remove moisture from your product. But the drying process must cater to variations in the state of matter and molecular structure of the input material. Industrial dryer technology exploits the modes of heat transfer (convection, conduction, radiation, evaporative cooling) to control the moisture content.

Drying

The fishmeal powder market forecast shows that its global market value will reach USD 10.3 billion by 2025. Expanding since 2019, at an annual growth rate of 6.5%. Fishmeal powder production has strong business potential with the increase of applications in animal feed, pet food, and fortified foods.

Fishmeal powder

Flash drying refers to the removal of moisture by a stream of hot gas that goes through a stream of small particles that moves in the opposite direction. When drying large quantities of bulk powders, it can be important to better control the output characteristics of the powder. For this, combining drying, milling and classifying steps in one piece of equipment can be beneficial.


<h2>More control in your flash drying system</h2>
The Micron Dryer flash dryer, Drymeister® (DMR-H) from Hosokawa, can dry temperature-sensitive products, safely, even under increased temperatures, in a matter of seconds. Process parameters like classifier speed and outlet temperature can be adapted to control moisture content and particle size of the end product. The drying system is very flexible, handling moisture content fluctuations from a few % up to more than 80% in suspensions, slurries, pastes, dough, filter cakes and wet powders. The Drymeister® requires 75% less space and uses about 30-40% less energy per kilogram of evaporated water than conventional methods. The Flash combines drying system can be used in different industries such as the food industry, the chemical industry with applications in products such as pesticides, inorganic pigments and fish feed.

Flash drying system

Many industries that process materials in pellet, powder, or crumble form need a closely controlled drying and/or cooling process to ensure product quality. This line of cooling/drying conveyors provides this function in a highly flexible, modular design configurable to any industry.


<h2>A completely modular line of drying and cooling conveyors</h2>
Amandus Kahl’s line of cooling /drying conveyors is configurable to meet the cooling and drying needs of any industry that deals with pelletized or granular dry bulk material. Process air is drawn through a layer of the customer’s bulk product as it travels along a conveyor. The conveyor bed is either composed of slotted plates attached to driven chains, or a full fabric belt depending on the characteristics of the product being cooled or dried. The belt speed is adjustable and used along with configuration of the overall belt length to precisely determine the product retention time. For enhanced drying, process air can be heated to 200 C, but drying can also be achieved using only air at ambient temperature. Cooling is also controlled and enhanced by the characteristics of the process air and overall product retention time. The modular design of the line allows the use of several layers of belts to be stacked on top of one another and a wide variety of belt widths and lengths are available. Airflow through the array of belts can also be uniquely configured to accommodate a wide variety of process needs.

Belt dryer/cooler for pellets and granules

Traditional drying methods in the pet food, aquafeed, and extruded food industry can be the most energy-consuming process. A state-of-the-art, compact and competitive solution, suitable for continuous drying applications can reduce your energy costs and downtime while maintaining high moisture uniformity.


<h2>Energy-efficient continuous drying with high moisture uniformity over time</h2>
The Geelen Counterflow Continuous dryer reduces the cost of energy consumption by 15-25% compared to its competitors for any drying requirements. It partially recirculates the dryer air back into the heater, maximizing energy efficiency while only a limited volume of air is exhausted at high relative humidity.

The counterflow technique also helps it achieve high moisture uniformity after drying. Its online microwave moisture sensors allow you to make sure the target moisture percentage is automatically achieved, under all circumstances.

Designed for easy cleaning, it is especially useful for hygienic operations for example, in the food processing industry. Its hydraulically driven drying decks release all of the product to the next stage is befitting with any production requirement.

&nbsp;

Continuous dryer machine

When you need to produce ultra-fine powders, the milling and drying process employed is what ensures the consistency of your product. To process minerals and chemicals, you need a machine which is powerful, flexible, simple to maintain.


<h2>Versatile and highly efficient milling and drying</h2>
Atritor’s cell mill has been constructed to produce ultra-fine powders. It is able to grind, flash dry, classify and surface coat powders at the same time. Its capacity ranges from 50 kilograms per hour to 15 tonnes per hour, with evaporation rates up to 3,000 kilograms per hour.

The feed can be dosed directly into the machine via a screw feeder or via the inlet air duct. It is then ground in a vertically mounted, multi-stage rotating rotor. Each of the rotor sections is constructed with up to 200 quick-change blades. There is also the possibility for a classifier which is mounted at the discharge section to ensure that oversized feed particles are either discarded or recirculated.

The mill acts as an efficient dryer when the process air is heated using a hot air generator or even waste heat from another process. It can reach an inlet temperature of up to 450ºC. Heat energy from the process can be recovered from the heated air stream and utilized to preheat the intake air. After flash drying, the product is kept cool due to evaporative cooling via the constant exposure of new surface areas of the product created during attrition.

In the case of minerals that require surface treatment, the cell mill provides a range of coatings and surface modifiers that can be added on the side of the machine during the milling process. It has a wide range of applications, from minerals like GCC, clay and limestone to chemicals, dyes, pigments and a wide range of food ingredients and by-products.

Milling and drying machine for fine powders

Find production technology for Fishmeal powder drying, and connect directly with leading machine manufacturers worldwide

Fishmeal powder drying

Which fishmeal powder drying equipment do you need?

Flash drying system

Belt dryer/cooler for pellets and granules

Continuous dryer machine

Milling and drying machine for fine powders

There is currently no equipment listed with your specified properties, but we are sure we can help you. Try us!Contact us

Let's talk about your project!

Related technologies