operation type

product format

Privacy Policy

User Agreement

Terms of Service

Default Confirmation

If too long

This form auto replies from Zendesk on submission
on Trigger ID: tbc
https://vekamafsupport.zendesk.com/agent/admin/triggers

Admin Notification

New submission from {form_title}

Messages backup

Notify Teammedia of submission

Submission from Making.com Ad Campaign

Maker - Product Challenge

Products

Technologies

About us

Contact

Bagging is the process of packaging measured portions of a product into bags that protect it from spoilage, enable easy and safe transportation, and secure the product against tampering and pilferage. The choice of bagging equipment depends on the desired mass or volume per bag, the flow characteristics of the product, and bag construction and design. Bags vary in size from small sachets to bulk flexible containers. Bagging systems are often the last processing step that is generally integrated into a production line.

Bagging

Fodder

If you are looking for a weigher that is manually controlled for bagging, here it is. It has quick connection junction box, valve manifold and sensors allowing quick installation and easy maintenance.


<h2>Simple but effective open-mouth bagging system</h2>
The E55-MB series from Premier Tech Chronos manual bagging system is a leading edge electronic net weighing system designed to be used as a bagging station in combination with bag clamps, a closing system and a conveyor.

It is designed to operate in a wide range of industries such as food, pet food, feed, seeds, chemicals, salt, aggregates etc. The system can be equipped with different feeding devices (gravity, gravity-agitator, belt, screw and vibratory feeder).

Manual bagger with net weigher

Unacceptably high dust levels can be generated whilst manual emptying and handling of bags, also products can be dangerous if they come into skin contact or are inhaled. Further issues of product wasting and contamination whilst discharging bags can be difficult to eliminate.


<h2>Continuously discharge bags, automatically and dust free</h2>
The TBMA 'Galahad' automatic bag slitter is suitable for the continuous and dust-free handling of all types of single or multi-layered bags. Any size of paper or plastic bag, whether lightly or densely filled with granular or powdered products, can be cut and emptied without problems. Standard operation will handle approximately 20 tons per hour, however, depending on the properties of the product and the condition of the bags, capacities of up to 50 tons per hour can be obtained.

Automatic bag slitter

There are many considerations when handling FIBC's (Flexible Intermediate Bulk Containers) or Big Bags, namely the kind of product, type of bag used, environmental aspects, system capacity and budget constraints. Bags need to be correctly hung, stretched and vibrated during filling to avoid unstable, poorly filled and unstackable bags. The major concerns when discharging bags are dust emissions, product loss and product contamination.


<h2>Safe and effective filling, weighing and discharge of Big Bags</h2>
TBMA has a wide range of expertise in the application of hygienic FIBC handling equipment, with proven reliability in practice, which allows correct assessment of the right system for every situation. TBMA Big-Bag filling systems can be supplied to handle weights ranging from 500 to 2000 kg. Filling capacities up to 70 bags per hour can be achieved depending on the type of product feed and system lay-out.

Hygienic FIBC handling line

If you are a manufacturer of fertilizers, bulk chemicals, sugar, seeds, or any grains it is likely that you would need to transport a lot of free-flowing bulk products. Maintaining precise weighing and dosing while bagging these products can be a challenge. You would ideally require an efficient and reliable bagging solution which can overcome all of these challenges.


<h2>Save time with a fast and easy to maintain bagging solution</h2>
STATEC BINDER’S PRINCIPAC is a fully automatic, high-performance bagging solution for open-mouth bags. It can process up to 2000 bags per hour, making it one of the leading bagging solutions.

The open mouth bagging machine can process both pillow and gusset bags with filling weights ranging from 10 kg to 50 kg. It can process bags made of woven polyethylene (PE), polypropylene (PP) and paper. The prefabricated bags are separated from the magazine and individually transported to the pickup station with the help of vacuum suction cups. These bags are then opened to maximize their volume by the suctions bar, and are clamped to the filling spout. The product is measured to the specified level and is filled into the bag. Upon finishing the filling process, the bags are placed on the conveyor belt and then transported to the bag sealing machine. The bag is then sown, heat-sealed or hot-glued depending on its material.

It is ideally suited for any type of free-flowing bulk products such as petrochemical bulk materials, chemicals, sugar or rice. It can also have an additional equipment such as a dustproof filling spout for powdery products such as flour.

Open mouth bagging machine

Find production technology for Fodder bagging, and connect directly with leading machine manufacturers worldwide

Fodder bagging

Which fodder bagging equipment do you need?

Manual bagger with net weigher

Automatic bag slitter

Hygienic FIBC handling line

Open mouth bagging machine

There is currently no equipment listed with your specified properties, but we are sure we can help you. Try us!Contact us

Let's talk about your project!

Related technologies