Save time with a fast and easy to maintain bagging solution

STATEC BINDER’S PRINCIPAC is a fully automatic, high-performance bagging solution for open-mouth bags. It can process up to 2000 bags per hour, making it one of the leading bagging solutions.

The open mouth bagging machine can process both pillow and gusset bags with filling weights ranging from 10 kg to 50 kg. It can process bags made of woven polyethylene (PE), polypropylene (PP) and paper. The prefabricated bags are separated from the magazine and individually transported to the pickup station with the help of vacuum suction cups. These bags are then opened to maximize their volume by the suctions bar, and are clamped to the filling spout. The product is measured to the specified level and is filled into the bag. Upon finishing the filling process, the bags are placed on the conveyor belt and then transported to the bag sealing machine. The bag is then sown, heat-sealed or hot-glued depending on its material.

It is ideally suited for any type of free-flowing bulk products such as petrochemical bulk materials, chemicals, sugar or rice. It can also have an additional equipment such as a dustproof filling spout for powdery products such as flour.

The post Open mouth bagging machine appeared first on Making.com.

Save time with a fast and flexible open-mouth bagging carousel

STATEC BINDER’s CIRUPAC is a high-performance bagging carousel which is extremely reliable and accurate. It is specially designed for the packaging of flour and powdery products in pillow bags and gusset bags with a filling weight of 10 kg to 50 kg. It is ideal for filling prefabricated open mouth bags made of woven PP, PE or paper, and can achieve a maximum output of up to 1200 bags per hour.

The Open-mouth bag filling machine for powders is configured with a continuously rotating carousel. The components of the machine are connected to each other with utmost precision to ensure a seamless operation. The prefabricated bags are individually separated from the magazine by vacuum suction and are sent to the pickup station. Upon arrival to the filling spout, the bag is opened and clamped to the filling spout for the filling process. The product is then measured to the specified level and poured into the bag via an intermediate hopper.

At any given time, up to six bags can be filled via the six different filling stations housed in the carousel. The filled bags are transported to the bag sealing station, and during the time of transport the product is continuously compacted by special vibration plates. All these steps take place continuously, thus ensuring a seamless packed bag output. Its applications include powdery products such as flour, animal feed premixes or corn starch, etc.

The post Open mouth bag filling machine for powders appeared first on Making.com.

High production capacity, flexibility, while saving time

STATEC BINDER’S SYSTEM-T is a fully automatic form fill seal bagging machine in which forming, filling and sealing of a package take place on the same machine. It can bag up to 2400 units per hour and combines high-quality packaging from a polyethene (PE) tube with high production capacity.

The form fill seal bagging machine has workstations for forming, filling and sealing the bags, which means that three bags are always being processed simultaneously. This enables a shorter cycle time for each stage of the process. It also ensures that even at high production speeds the bags are always formed, filled and sealed at the precise moment. Its modern yet sturdy configuration lays emphasis on easy accessibility, generous clearances, long maintenance intervals and low maintenance costs.

Due to the high flexibility of the form fill seal bagging machine it can be adapted to different customer requirements. For example, pillow bags and gusset bags can be produced with or without carrying handle and a filling weight between 5 kg and 50 kg. Additional perforation of the bags is also possible.

The post Form fill seal bagging machine appeared first on Making.com.

High-performance and high flexibility

STATEC BINDER’S SYSTEM-F is a fully automatic vertical form-fill-seal packaging machine. It has a bagging capacity of about 900 bags an hour. It produces pillow bags and gusset bags with or without carrying handle and a filling weight between 5 kg and 50 kg from the flat film.

The flat film to be used for packaging the product is first inflated with the help of a forming shoulder. This process is easily carried out because the forming shoulder is laced with a low friction coating. The initial seal on the film is made by a constantly heated hot-sealing bar, which performs vertical overlapping sealing. The product to be packaged is weighed according to pre-set requirements and is poured into the film via the filling tube. The hot-sealing bar then seals the filled package on the top, while also forming a lower seal for the next flat film. The packaging system also has a built-in blade which ensures that filled bags are separated from the tube. The entire process is carried out with the shortest possible cycle times with the help of an intensive air cooling system.

The Vertical Form Seal Machine has an adjustable format set which allows different package sizes to be produced. The format or production can be changed by just one person in just a few minutes by a rotating magazine. This rotating magazine is installed directly on the machine and holds several format sets of different sizes ready at all times. Although it is primarily aimed to be used for packaging moderately free flowing products such as chemicals, it is also suitable to be used with products such as animal feed, fertilizer and salt.

The post Vertical form fill seal machine appeared first on Making.com.

Top loading the product in the bag and sealing it shut

The Basis17, designed by Basis, is a fast model for packing bulk production a so called pillow bag, gusset bag or stabilo bag.  The machine reaches a speed of up to 120 packs per minute. A pillow bag is formed from a continuous roll of packaging film and guided over a forming tube. Seal bars bond the film on the two long sides of the bag after which the shorter bottom side is sealed by a separate seal bar. The product is then loaded into the bag through a forming tube and once the bag is filled, the top of the bag is sealed as well. The long film that forms several bags is now separated by a knife to form individual bags. After this stage, the end product is discharged from the machine.

The Basis17 gives the opportunity to pack the product in a wide range of packages, including pillow, gusset and stabilo bag. It can be integrated with weighters such as a volumetric rotary, a volumetric auger, a weight vibration (linear) or a combination (multi-head) of types. It is possible to pack products in the weight range from 25 gram to 1000 gram.

The post Pillow bag vertical packing machine appeared first on Making.com.

A disposable pillow bag for bioprocess containment manufactured in strict clean room conditions

JM BioConnect is known for certified top of industry quality and customer service including very short lead times.  The company’s pillow bags use a film specifically developed by JM BioConnect to meet the needs of bioprocessors from laboratory to production plant scale.  The film, known as JMS Flex Film is manufactured to the highest quality standards and has the highest clarity of any film used for bag manufacture.  It is manufactured under laminar flow conditions in a class 7 clean room.  The pillow bags are available in sizes from 50mL to 50L and include a completely inert polyethylene fluid contact layer.  They are resistant to damage caused by gamma sterilization, have very low oxygen permeability (.1cc/sqrM.bar.day), and are unsurpassed in clarity and flexibility.

The post Disposable pillow bags for bioprocesses appeared first on Making.com.